Page 2 - Labcon U-Pette.pdf

Using the U-PetteTM
®
Labcon North America Petaluma, CA, U.S.A
+1.707.766.2100 info@labcon.com www.labcon.com
7626-500
7626-540
U-PetteTM Ordering Information
5 Boxes of 100 U-PettesTM 500
1 box of 100 U-PettesTM 100
Labcon U-PetteTM
Labcon’s U-PetteTM provides a quick and easy way to dispense blood into a test cassette without removing the cap from the collection tube. This greatly reduces the risk of infection due to aerosol exposure. Made of acrylic and stainless steel, U-PetteTM’s flexible sides allow for efficient and precise delivery of required sample amount, whether it’s one droplet or continuous flow dispensing. Labcon’s U-PetteTM fits all standard blood collection tubes and is ideal for use with many point of care analyzers such as the Abbott® i-Stat® Helena® Abrazo® and other POC Analyzers that requires the delivery of a sample to a test cartridge or cassette.
Compliant with the IVD Directive 98/79/EC and lot tested Endotoxin (Pyrogen) Free.
CFR 21
USFDA
COMPLIANT
i-STAT is a registered trademark of the Abbott Group of Companies
3
Invert tube and place tip all the way into sample well until it reaches the bottom.
2
Insert metal cannula through existing needle puncture of the capped tube.
1
Grasp center of the U-PetteTM at the side of the disc as shown.
4
Use tabs to counter pressure and push down on tube to dispense sample as needed.
Catalog #
Description
Total U-PettesTM
U-PetteTM is made of acrylic with a stainless steel cannula. Cannula tip length is 0.18”. Fits all standard 13mm and 16mm blood collection tubes.
Product details are current when published; subject to change without notice. Labcon, the Labcon logo, and variations on the foregoing are registered (®) or unregistered trademarks and service marks, of Labcon North America. © Copyright 2017 Labcon. All rights reserved.
REV 1_ 6.14.17
e
d
a
r
G
R
e
s
i
n
l
a
a
n
c
d
i
d
e
M
P
a
c
k
a
g
i
n
g