Bench Work Racks
Labcon offers options for storing samples of all kinds. From centrifuge racks to micro tube boxes we have a storage solution for your lab.
Labcon storage racks for disposables let you eliminate wasteful styrofoam or cardboard racks. They are autoclavable and reusable.
All our resins are pre-tested for metal contamination. Certificates are downloadable from us by lot number for all our tips and available from the certificates page.
Efficient Bench Use
Our bench rack work racks can be assembled to hold either 24 or 48 tubes up to 2.5mL in size. Made of polypropylene this rack is autoclavable and freezable.
This rack system holds 0.5mL, 1.0mL, 1.5mL, 1.7mL, 1.8mL and 2.0mL and micro centrifuge tubes and culture tubes. You can assemble it into the configuration that works for your lab. Available as open racks, racks with lids, in 24 place, or in 48 place.
Autoclavable and Freezable -80°C. Each rack section holds 24 tubes. White color.
 |
Endotoxin Free (Non pyrogenic) Product samples are exposed to endotoxin-free water and the resulting extraction fluid is tested for contamination using the kinetic turbidimetric Limulus Amoebocyte Lysate (LAL) assay protocol and USP guidelines. All products tested must display less than 0.05 EU/ml to be certified free of endotoxin. |
 |
Nuclease Free (RNase/DNase) Product samples are exposed to nuclease-free water and the resulting extraction fluid is tested for nuclease activity on commercially available 7.5 kb Poly(A) tailed RNA (1µg) and HindIII-digested DNA (1µg) with a one hour 37°C incubation in appropriate buffers. Results are visualized on an agarose gel with appropriate positive and negative controls. Extraction fluid samples must show no degradation of the nucleic acids by the extraction fluid has occurred for the product to be certified as RNase-free and DNase-free |
 |
Adenosine Triphosphate (ATP) Product sample surfaces are tested for the presence of adenosine triphosphate (ATP) using a controlled bioluminescence reaction to detect contamination. Luminescence data is compared to results generated by ATP-free surfaces and surfaces with known amounts of ATP as a positive control. The relative light units result must indicate less than 2 X 10-12 mg/µl of ATP for the product to be certified as ATP free. |
 |
Bovine Spongiform Encephalopathy-Transmissible Spongiform Encephalopathy These products contain resins that are processed under conditions proven to exceed the European Union standard as listed in the 22nd Commission Directive EC 98/16/EC of March 5th, 1998 as annexed to council Directive EC 76/768/EEC and further Amendment 419 Annex II of 12 June 2001. |
 |
Medical Grade (USP) U.S Pharmacoepia Methods and Guidelines (U.S.P Class VI) are used if applicable. We only use medical grade resins and pre-test all resins for contaminants prior to use. Resins are compliant with FDA CFR title 21-177.1520, 178.3295, 178.3297. |
 |
California Prop 65 No Labcon manufactured disposables contain any of the “listed chemicals” as referenced in the California Safe Drinking Water and Toxic Enforcement Act of 1986, (Prop 65) as revised May 25, 2018. |
 |
Phthalates & Oleamide All our resins are medical grade and are certified free of Bisphenol A (BPA), Oleamide, DiHEMDA, and Phthalates. |
 |
Substances of Very High Concern & REACH All Labcon products are compliant with RoHS Directive 2002/95/EC/-2011/65-2015/863, are free of Substances of Very High Concern (SVHC), and are EU REACH Regulation (EC) No 1907/2006 compliant. |
 |
Origin These products are Made in USA and all components meet the requirements for US origin under the NAFTA agreement. |
 |
U.S. FDA Registered Labcon is a U.S. FDA registered medical device manufacturer. Our facility is registered by the U.S. government to comply with CFR21 GMP regulations for manufacturing medical devices. |
 |
CE Compliant As applicable Labcon products meet the requirements for CE marking under regulation 2017/746. |
 |
ISO 9001 Quality Registration Labcon has been registered to the ISO 9001 quality management system standar since 1997 and maintains registration to ISO 9001:2015. |
| Material | 100% Polypropylene |
| Grade | Medical |
| Rating | USP Class VI |
| Color | White |
| Length | Various |
| Fits | Most popular tube sizes |
| Approved Use | Medical, Research, Industrial, Food & Beverage |
Bulk Box
The bench rack is packaged inside a carton.
