Tube Racks
Labcon offers a variety of tools for storing samples of all kinds. From centrifuge racks to freezer boxes to bench racks we have unique storage solutions for your lab.
Labcon storage racks for tubes let you eliminate wasteful styrofoam or cardboard racks. They are autoclavable and expandable.
All our resins are pre-tested for metal contamination. Certificates are downloadable from us by lot number and available from the certificates page.
Efficient Bench Use
Our expandable tube racks can be assembled to hold 5mL, 15mL and 50mL tubes. You can link sections of 25 to suit your needs. Made of polypropylene this rack is autoclavable and freezable.
This 25 rack is available in formats to hold 50mL and 15mL or 5ml conical centrifuge tubes. You can also use them to hold conical bottom culture tubes and some round bottom tubes. You can link the racks to assemble into the configuration that works for your lab. By adding additional sections you can build a complete workstation with color coding.
Autoclavable and Freezable -80°C. Each section holds 25 tubes. Available in Natural color, White, Yellow, Orange, Red, Blue, Green, and Purple colors. Made of polypropylene.
 |
Endotoxin Free (Non pyrogenic) Product samples are exposed to endotoxin-free water and the resulting extraction fluid is tested for contamination using the kinetic turbidimetric Limulus Amoebocyte Lysate (LAL) assay protocol and USP guidelines. All products tested must display less than 0.05 EU/ml to be certified free of endotoxin. |
 |
Nuclease Free (RNase/DNase) Product samples are exposed to nuclease-free water and the resulting extraction fluid is tested for nuclease activity on commercially available 7.5 kb Poly(A) tailed RNA (1µg) and HindIII-digested DNA (1µg) with a one hour 37°C incubation in appropriate buffers. Results are visualized on an agarose gel with appropriate positive and negative controls. Extraction fluid samples must show no degradation of the nucleic acids by the extraction fluid has occurred for the product to be certified as RNase-free and DNase-free |
 |
Adenosine Triphosphate (ATP) Product sample surfaces are tested for the presence of adenosine triphosphate (ATP) using a controlled bioluminescence reaction to detect contamination. Luminescence data is compared to results generated by ATP-free surfaces and surfaces with known amounts of ATP as a positive control. The relative light units result must indicate less than 2 X 10-12 mg/µl of ATP for the product to be certified as ATP free. |
 |
Bovine Spongiform Encephalopathy-Transmissible Spongiform Encephalopathy These products contain resins that are processed under conditions proven to exceed the European Union standard as listed in the 22nd Commission Directive EC 98/16/EC of March 5th, 1998 as annexed to council Directive EC 76/768/EEC and further Amendment 419 Annex II of 12 June 2001. |
 |
Medical Grade (USP) U.S Pharmacoepia Methods and Guidelines (U.S.P Class VI) are used if applicable. We only use medical grade resins and pre-test all resins for contaminants prior to use. Resins are compliant with FDA CFR title 21-177.1520, 178.3295, 178.3297. |
 |
California Prop 65 No Labcon manufactured disposables contain any of the “listed chemicals” as referenced in the California Safe Drinking Water and Toxic Enforcement Act of 1986, (Prop 65) as revised May 25, 2018. |
 |
Phthalates & Oleamide All our resins are medical grade and are certified free of Bisphenol A (BPA), Oleamide, DiHEMDA, and Phthalates. |
 |
Substances of Very High Concern & REACH All Labcon products are compliant with RoHS Directive 2002/95/EC/-2011/65-2015/863, are free of Substances of Very High Concern (SVHC), and are EU REACH Regulation (EC) No 1907/2006 compliant. |
 |
Origin These products are Made in USA and all components meet the requirements for US origin under the NAFTA agreement. |
 |
U.S. FDA Registered Labcon is a U.S. FDA registered medical device manufacturer. Our facility is registered by the U.S. government to comply with CFR21 GMP regulations for manufacturing medical devices. |
 |
CE Compliant As applicable Labcon products meet the requirements for CE marking under regulation 2017/746. |
 |
ISO 9001 Quality Registration Labcon has been registered to the ISO 9001 quality management system standar since 1997 and maintains registration to ISO 9001:2015. |
| Material | 100% Virgin Polypropylene |
| Grade | Medical |
| Rating | USP Class VI |
| Colors | Yellow, Blue, Green, Purple, Orange, Natural, White, Red |
| Length | Various |
| Fits | Most popular 5mL, 15mL, 50mL tubes |
| Approved Use | Medical, Research, Industrial, Food & Beverage |
Bulk Box
The set of tube racks is packaged inside a single carton.
