ZAP Aerosol Pipette Tips

ZAP

ZAP™ Aerosol Barrier Pipette Tips

ZAP™ Aerosol Filter Pipette Tips from Labcon set a higher standard for your lab than ordinary filter pipette Tips. Our aerosol Tips provide you with complete protection from sample carry-over, Incorporating a patented filter that is made from high molecular weight polyethylene. The filters allow the pipettor to draw by venting through a tortuous sponge-like pathway. The pores in this pathway have an average size of 10µm, so even radionucleotides are captured before reaching the pipettor barrel.

ZAP
ZAP

Patented Filters

All our ZAP™ Tips in racks are packed in our trademarked Teal or Purple racks. These racks are made of polypropylene and are autoclavable repeatedly. They have sturdy latch hinges that won't come apart like lesser quality tip racks and a special snap lock designed so that it will not catch on your gloves. You can also get ZAP™ in Eclipse™ UNO refills.

ZAP™ Aerosol Filter Pipette Tips have been proven in studies to block aerosol contamination. Unlike some leading brands of self sealing aerosol resistent pipet tips they have no cellulose gum , toluene solvent, or colored dyes in the filter to mix with and contaminate your sample. Also, unlike self sealing aerosol tips ZAP™ Tips can be autoclaved in a steam autoclave. And they will not wick fluids like cellulose filled aerosol resistent tips so you don't have to worry about how you hold your pipettor.


Each style of ZAP™ Tips is designed from the beginning to fit precisely the range of pipettors listed in the fit charts. We carefully inspect the fitting with the actual pipettors, not just with measuring gauges. This means you won’t have to worry about leaking Tips and you don’t have to use extra force to mount these Tips.


ZAP™ tips feature a pure 10µm pore size patented filter without any dyes or additives. The pores on this filter are 100% smaller than those in other aerosol tip brands. A smaller pore guarantees that your pipettor barrel will be kept clean of DNA, radionucleotides, and other contaminants. And this filter works to block fluids without any contaminants in the filter so you never have to worry that your work will be spoiled if your sample contacts the filter.


ZAP Tips

Endotoxin Endtoxin Free (Non pyrogenic)
Product samples are exposed to endotoxin-free water and the resulting extraction fluid is tested for contamination using the kinetic turbidimetric Limulus Amoebocyte Lysate (LAL) assay protocol and USP guidelines. All products tested must display less than 0.05 EU/ml to be certified free of endotoxin.
RNase/DNase Nuclease Free (RNase/DNase)
Product samples are exposed to nuclease-free water and the resulting extraction fluid is tested for nuclease activity on commercially available 7.5 kb Poly(A) tailed RNA (1µg) and HindIII-digested DNA (1µg) with a one hour 37°C incubation in appropriate buffers. Results are visualized on an agarose gel with appropriate positive and negative controls. Extraction fluid samples must show no degradation of the nucleic acids by the extraction fluid has occurred for the product to be certified as RNase-free and DNase-free
ATP Adenosine Triphosphate (ATP)
Product sample surfaces are tested for the presence of adenosine triphosphate (ATP) using a controlled bioluminescence reaction to detect contamination. Luminescence data is compared to results generated by ATP-free surfaces and surfaces with known amounts of ATP as a positive control. The relative light units result must indicate less than 2 X 10-12 mg/µl of ATP for the product to be certified as ATP free.
DNA DNA Free (Human)
To confirm the freedom from DNA amplification products are examined by Agarose gel electrophoresis with appropriate positive and negative controls. PCR reactions using extraction fluid must show no PCR- amplified product compared to a positive control containing one picogram of human genomic DNA for the product to be certified as DNA-free.
Protease Protease Free
Product samples are tested and certified to be free of detectable Protease. Extraction fluid is tested for the presence of protease activity by examining test protein degradation in the extraction fluid compared to a negative control and positive control reactions supplemented with 2 nanograms of Proteinase K or Trypsin.
Heavy Metals Heavy Metals Free
Heavy metals have been tested for using the prescribed USP method and confirmed to have levels lower than 1 part per million (1ppm)
Sterilization Validated Sterilization
Labcon products are sterilized by radiation sterilization within a dose range of 12-35 kGy. The dose range necessary for the stated sterility assurance level is continuously audited through quarterly bio-burden and sterility validation studies performed according to the ANSI/AAMI/ISO 11137 standard by an independent laboratory. This dosage is sufficient to guarantee a sterility assurance level of 10-6.
BSE/TSE Bovine Spongiform Encephalopathy-Transmissible Spongiform Encephalopathy
These products contain resins that are processed under conditions proven to exceed the European Union standard as listed in the 22nd Commission Directive EC 98/16/EC of March 5th, 1998 as annexed to council Directive EC 76/768/EEC and further Amendment 419 Annex II of 12 June 2001.
USP Medical Grade (USP)
U.S Pharmacoepia Methods and Guidelines (U.S.P Class VI) are used if applicable. We only use medical grade resins and pre-test all resins for contaminants prior to use. Resins are compliant with FDA CFR title 21-177.1520, 178.3295, 178.3297.
Prop 65 California Prop 65
No Labcon manufactured disposables contain any of the “listed chemicals” as referenced in the California Safe Drinking Water and Toxic Enforcement Act of 1986, (Prop 65) as revised May 25, 2018.
Phthalates Phthalates & Oleamide
All our resins are medical grade and are certified free of Bisphenol A (BPA), Oleamide, DiHEMDA, and Phthalates.
SVHC Substances of Very High Concern & REACH
All Labcon products are compliant with RoHS Directive 2002/95/EC/-2011/65-2015/863, are free of Substances of Very High Concern (SVHC), and are EU REACH Regulation (EC) No 1907/2006 compliant.
USA Origin
These products are Made in USA and all components meet the requirements for US origin under the NAFTA agreement.
FDA U.S. FDA Registered
Labcon is a U.S. FDA registered medical device manufacturer. Our facility is registered by the U.S. government to comply with CFR21 GMP regulations for manufacturing medical devices.
CE CE Compliant
As applicable Labcon products meet the requirements for CE marking under directive 98/79EEC.
ISO ISO 9001 Quality Registration
Labcon has been registered to the ISO 9001 quality management system standar since 1997 and maintains registration to ISO 9001:2015.
Material 100% Virgin Polypropylene/polyethylene
Grade Medical
Rating USP Class VI
Color Natural (Clear)
Length Various
Fits Most popular pipette brands
Approved Use Medical, Research, Industrial, Food & Beverage
Lot Expiration 4 years
Sterile Expiration 3 years
Individual Wrap
Individual Wrap

Individually wrapped packaged in thermal sealed polyethylene bags. These tips have been radiation sterilized. This package is designed to provide the highest assurance that the tips you use are pure.

Loose
Loose Pack

Loose pack pipette tips are supplied in resealable polyethylene bags. These are not recommended if you plan to store the tips for long periods since warping can occur after long periods of storage in bags.

96 Rack
ZAP™ Aerosol Tip Rack

The same 96 rack that are extremely durable and an ergonomic snap latch that won't catch gloves. Smooth rounded edges and reinforced seal make these racks durable additions to your lab. Strong enough to be autoclaved many times. The separate rack insert includes a beveled top and extra sturdy surface for multi-channel pipetting. A vent in the rack sides allows steam autoclaving to be more efficient and assures your tips are sterile.

UNO
Eclipe™ UNO Refill

Eclipse™ UNO refills can be used to refill Labcon pipette tip racks with ZAP™ Aerosol Tips. Their low carbon footprint makes them an ideal solution to waste reduction goals for your lab. They refill racks without your having to touch the tips or racks so you don't need gloves.

FDA Registered

Labcon is the only major pipette tip supplier to be registered by the U.S. Food and Drug Administration to manufacture medical devices.

Medical Grade Resins

Only 100% Medical Grade virgin polypropylene resins are used in ZAP™ Tips. No recycled plastics or commodity grade resins.

Lab Tested

ZAP™ Tips are developed using our own in-house laboratory and tested on real pipettors. We use actual lab results on real pipettes.

Certified Quality

Our products are made to ISO standards and we are audited every 6 months to ensure you continous quality.

Certificates Online

Real test certificates are available by lot for ZAP™ tips for you to download from the certificates page.

Sustainability Built In

ZAP™ tips are designed from the beginning with sustainability in mind. Beyond simple recycling to real solutions.